PUDU T600 Series Payload Industrial Robot
Description
PUDU T600 Series Payload Industrial Robot (What 600 kg Moves Look Like)
If your team still pushes heavy carts or tugs pallets by hand, you already know the cost, slow runs, sore backs, and near-misses in busy aisles. The PUDU T600 Series Payload Industrial Robot is built to move heavy loads inside warehouses and factories, over and over, with less manual effort.
This post covers what it is, how the T600 and T600 Underride differ, and what matters most in daily use: payload, routing, safety, and how to roll it out on site.
What is the PUDU T600 Series Payload Industrial Robot, and who is it for?
The PUDU T600 Series Payload Industrial Robot is a heavy-payload industrial delivery robot for internal logistics. Think of it as a self-driving “carry job” for warehouses, production plants, and distribution centers where loads move all day between storage, kitting, line-side, and shipping.
It fits teams that need consistent transport without adding forklifts or asking operators to shove 300 kg carts across concrete. It can support cross-floor deliveries when elevators are part of the route, and it helps reduce congestion by keeping material flow predictable. In short, it’s built for repetitive, heavy moves that can’t depend on luck and muscle.
T600 vs T600 Underride: which version fits your workflow?
Both versions handle up to 600 kg. The standard T600 is a larger top-carry style and can pass through 70 cm minimum clearance. The T600 Underride is a lower, under-rack form factor, suited to moving racks or carts from underneath, with 65 cm minimum clearance.
Two practical differences matter: the ground projection warning line is not on Underride, and the power-assist switch is also not on Underride.
Key features that make heavy-load transport faster and easier
Big payload is only useful if the robot can handle real aisles, real floors, and real traffic. The T600 series focuses on fewer trips per shift, less pushing, and more stable routing when people and equipment share space.
It’s easy to picture in line-side supply: instead of three smaller runs for bins and parts, a single 600 kg trip can cover a full restock cycle. For finished goods, it can move a loaded rack from packing to staging ithout waiting for a tugger.
600 kg payload capacity and a mobile chassis built for real floors
A 600 kg capacity increases per-trip output, which cuts delivery frequency. For site planning, the chassis supports a 10 mm surmountable height and a 35 mm gap. Speed runs from 0.2 to 1.2 m/s, and it operates from 0°C to 40°C.
Smarter navigation and handling in tight spaces
The T600 uses VSLAM + LiDAR SLAM, while the Underride uses LiDAR SLAM. In plain terms, it builds a map and drives itself. It also applies a narrow-aisle traffic strategy, choosing single-lane or dual-lane behavior based on aisle width and load size, plus dynamic obstacle avoidance that includes low objects.
Autonomous workflows: rack recognition, pick-and-place, and elevator scheduling
Rack group recognition and autonomous pick-and-place at target storage points support unmanned material flow. For multi-floor sites, idle elevator priority scheduling reduces waiting time and improves cross-floor throughput.
Safety, uptime, and integration: what to check before you deploy
Before buying, treat deployment like a checklist: where humans mix with robots, how long it must run, and how it connects to site systems
Built-in safety signals and emergency behavior
The T600 can project a ground warning line (not on Underride) and uses front indicator lights to communicate status. It also supports disaster avoidance behavior, responding to events like fire alarms or earthquakes by moving to a safe area or parking safely.
Battery, charging, and system connections (VDA5050, on-prem, IoT)
Plan around uptime: up to 12 hours runtime (no load) and fast charge in about 2 hours (0% to 90%). Options include auto recharging and battery replacement. Integration can include VDA5050 compatibility, on-premises deployment, IoT links, elevator control, e-gate control, pager calling, and fleet management through the Pudu Link app.
Conclusion
The PUDU T600 Series Payload Industrial Robot is a strong fit for heavy, repeatable internal logistics, racks, pallets, and line-side supply, especially where aisles are tight and elevators get busy. Start simple: map your heaviest routes, measure aisle width, confirm elevator needs, then request a site test or demo to validate 600 kg moves in your real flow.
[ITEMPRICE]